Give your playing a quick, musical trashy effect with CP Hex Stax!
The Hex Stax are comprised of 3 layers of hex-shaped steel. Each layer is individually cut, hammered and heat treated. No 2 are alike! Each set is paired and tested for sound to ensure they match.
- Each hex-shaped piece is hammered on both sides. This dual hammering leaves unique indentations and patterns protruding on each surface so they will never lay flat against each other, giving you a livelier sound. Additionally, you can flip them over and stack them in different orders to get different characteristics.
- The heat treatment gives each one a unique set of colors. Heat treating the steel also changes the sound, leaving each set with its own identity.
- Most stacks on the market are made of 2 layers, we’ve decided to go the extra mile and add a 3rd layer for more adaptability, creativity and depth to your sound.
Hex Stax are fully adjustable depending on how you stack them and how much you tighten your stand’s wingnut down. Don’t hesitate to experiment by flipping them over, changing the order and changing the orientation.
Available in multiple sizes, the smaller the size, the higher the pitch, the lower the volume. Get creative, find your own sound, buy a set of each size and interchange them.
If you already own a set of Hex Stax or want a combination of sizes, you can purchase individual layers from the "a la carte" metal option and completely change your sound! You can also combine the Hex Stax with our Holey Hex Stax for even more variation. Add a Hex Jingle or Hex Hub and hear the difference it makes!
While we do oil all our metal products before they leave the shop, the Hex Stax will oxidize over time. This oxidation is part of the organic look we were going for. Here at the Creative Percussion shop in the Northeast, we have a high moisture content which helps speed the aging and oxidation along a little faster. Depending on the climate you live in, you may see varying degrees of rust on your Hex Metal products over time as well.
Most people are loving the way their Hex Metal products have aged, but we realize that some people may prefer a cleaner, low-luster, oil-rubbed finish.
Here's how to get a low-sheen, oil-rubbed look:
-Apply a thin layer of WD-40 to your metal product.
-Rub the surface with a clean dry cloth, repeat until you no longer see rust coming off on the cloth.
-Depending on your level of rust, this may take several repetitions.
-The WD-40 will leave the surface feeling silky, if it still feels wet or too oily, simply wipe it down again with a paper towel.
-Please allow your Hex Metal product to air-dry overnight before using it.
This simple maintenance option will not remove the rust entirely; however, it will take the exterior surface rust off. The finish will have a low sheen to it, and you can reapply as often as needed.
We hope you love your Hex Metal products!
5" point-to-point, Weight: 5.4 oz.
7” point-to-point, Weight: 10.2 oz.
9” point-to-point, Weight: 17.1 oz.
11” point-to-point, Weight: 25.2 oz.
13” point-to-point, Weight: 35.7 oz.
15” point-to-point, Weight: 47.1 oz.