7" Sizzle Stax

7" Sizzle Stax

Whether striking it or bouncing it on your hi-hat, you’ll create new and unique rhythms with the Sizzle Stax.


The Sizzle Stax includes:

-Your choice of a Riveted 5”, 6”, 7” or 8” FX Splash Bell Dark

- A Riveted 3” Steel Disc

- A Rebound Clutch

- A Utility Clutch


*you will need at least 5 1/2" of exposed hi-hat rod for this product

Not enough space on your hi-hat rod?  Try our Hi-Hat Rod Extender!!


The Dark Series FX Splash, which is included in the Sizzle Stax, is 90% hammered with a ½” flat rim around the edge.  This hand-hammering process gives the Splash Bell its dome shape and creates a darker, richer tone compared to our Standard Splash Bells, which have a brighter tone.


Combining the Splash Bell Dark with the 3” steel disc and rivets gives you a cool SIZZLE effect and using it with our Rebound and Utility Clutches will give you a hi-hat effect like nothing else out there!


Try it as a stand-alone FX cymbal without the Rebound Clutch or use the whole setup on your hi-hat rod to get a cool sizzle sound with an incredible amount of motion!


  • Try it loose in the Utility Clutch for more cymbal movement and sound when striking it.
  • Try it tight in the Utility Clutch to give the rivets more bounce and to get a more exaggerated “sizzle” sound.
  • Adjust the distance between the Rebound Clutch springs to get more or less bounce.
  • Try it as a stand-alone FX cymbal (without the Rebound Clutch).
  • Try it with the Rebound Clutch to get sounds from both the up and  the down motions of your hi-hat.


Experiment with it to find a sound that suits you or keep changing things up for a variety of sounds.


Swap out the Sizzle cymbal for a Lotus Jingle, a Can Shaker. a Jingle Bell Ring or even a smaller set of Hex or Holey Hex Stax to create a whole new sound!


Assemble the Sizzle Stax with the Utility Clutch (as shown in the photo).  Place one half of the Rebound Clutch on your hi-hat rod and tighten the wing-knob to keep it in place. Place the assembled Sizzle Stax/Utility Clutch on the hi-hat rod, keeping the wing-knob on the Utility Clutch loose for maximum movement. Place the second half of the Rebound Clutch on the hi-hat rod and tighten the wing-knob to keep it in place.  Adjust the placement of the top Rebound Clutch to get your desired amount of movement.


Check out videos of the CP Sizzle Stax by typing #CPSizzleStax into your search engine, Facebook or Instagram.

Be sure to use the hashtag “#CPSizzleStax” in all your social media posts.