Holey Hex Stax (3 layers of same size)

You don’t have to go to church to get your dose of holey-ness!
 
The Holey Hex Stax Sets are comprised of 3 layers of the same size hex-shaped steel.  Each layer is individually cut, hammered and heat treated.  No two are alike!  Each set is paired and tested for sound to ensure they match.
 
The Holey Hex Stax are made with the same unique features as our regular Hex Stax.  The difference is that the Holey Hex Stax have less attack than our regular Hex Stax and they give you a wider, washier sound with a slightly higher pitch.  The smaller sizes have a little less volume to them, so they’d be perfect as an addition to the larger Hex Stax.  With the Holey Hex Stax, you’ll still get that trashy effect, but this series gives you a whole different sound.  Holey Hex Stax are available in even sizes from 6" all the way up to 16".
 
Also available are our Hex Stax, which give you a trashy sound with a great sharp attack.  Since they don't have holes, they will have more volume to them.  Our Stax sound is unlike anything else on your drum kit.  They will stand out from the ordinary.  Hex Stax are available in odd sizes from 5" all the way up to 15".
 
Combine the Hex Stax with the Holey Hex Stax to get the best of both worlds.  The sounds will cut through without being overpowering.  They are the perfect accent piece.  Have your sound your way because no two drummers are alike!
 
Unique features: 
The Holey Hex Stax are, well, holey!  Each hex-shaped piece is drilled by hand.
Each layer is hammered on both sides.  This dual hammering leaves unique indentations and patterns protruding on each surface so they will never lay flat against each other, giving you a livelier sound. 
Because they have different patterns, you can flip them over and stack them in different orders to get different characteristics.
The heat treatment gives each one a unique set of colors.  Heat treating the steel also changes the sound, leaving each set with its own identity.
Most stacks on the market are made of 2 layers, we’ve added a 3rd layer for more adaptability, creativity and depth to your sound.
 
Holey Hex Stax are fully adjustable depending on how you stack them and how much you tighten your stand’s wingnut down.  Don’t hesitate to experiment by flipping them over, changing the order and changing the orientation.
 
Available in multiple sizes, the smaller the size, the higher the pitch, the lower the volume.  Get creative, find your own sound, buy a set of each size and interchange them.  If you already own a set of Holey Hex Stax, you can purchase individual layers from the "Singles" metal option and completely change your sound! You can also combine the Hex Stax with our Holey Hex Stax for even more variation. Add a Hex Jingle, Hex Hub or anything from our Modular System and hear the difference it makes!
 
You can use either choice as an accent or as a ride cymbal, they work in many ways.  The larger sizes can be put in a snare stand and used as a “hip-hop snare drum”.  The Stax deliver a different sound when using the tip of the stick vs the shoulder of the stick.  As you change the sizes, the pitch and volume will change as well.  The smaller the size, the higher the pitch, the lower the volume.
 
While we do oil all our metal products before they leave the shop, the Hex Stax will oxidize over time.  This oxidation is part of the organic look we were going for.  Here at the Creative Percussion shop in the Northeast, we have a high moisture content which helps speed the aging and oxidation along a little faster.  Depending on the climate you live in, you may see varying degrees of rust on your Hex Metal products over time as well!
Most people are loving the way their Hex Metal products have aged, but we realize that some people may prefer a cleaner, low-luster, oil-rubbed finish.
 
Here's how to get a low-sheen, oil-rubbed look:
-Apply a thin layer of WD-40 to your metal product.
-Rub the surface with a clean dry cloth to ensure even coating. 
-Depending on your level of rust, it may take several repetitions to remove. 
-Let your Stax sit overnight then buff any excess oil off with a paper towel.  
 
This simple maintenance option may not remove the rust entirely; however, it will take the exterior surface rust off.  The finish will have a low sheen to it, and you can reapply the oil as often as needed. 
 
We hope you love your Hex Metal products!
 
Product Specs:
6” point-to-point, Weight: 7.2 oz.
8” point-to-point, Weight: 13.2 oz.
10” point-to-point, Weight: 20.4 oz.
12” point-to-point, Weight: 28.2 oz.
14” point-to-point, Weight: 39.9 oz.
16” point-to-point, Weight: 50.7 oz.